ART031 economic lift table

Ekonomia Altesta Tablo estas desegnita por transdoni pezajn ŝarĝojn, levi laborajn pecojn, kaj movi objektojn de la planko al levitaj pozicioj pli facila.Renovu kargon al la perfekta alteco kun la pied-funkciigita hidraŭlika bombo.

Tipoj de Levotablo:

---

Kiel profesia lifta tablo-fabrikanto dum multaj jaroj, ni disvolvis diversajn specojn de telfero, kiel ekzemple tondilo telfero, elektra telfero, senmova telfero, neoksidebla telfero, laborposteno, ktp ...

Galerio

---

Teknika Parametro de Ekonomia Leviga Tablo

---

Modelo	ART031	ART032
Kapacito kg (funt.)	220(484)	450(990)
Maksimuma Alto-Alteco mm (en.)	724(28.5)	876(34.5)
Minimuma Alto-Alteco mm (en.)	235(9.3)	279(11)
Platformo Grando mm (en.)	705*450(27.8*17.7)	813*508(32*20)
Pura Pezo kg (lbs)	40.5(89.1)	74(162.8)
Malpura Pezo kg (lbs)	44.5(97.9)	78.5(172.7)
Pako Grandeco mm (in.)	810*490*245(32*19*9.6)	980*560*290(38.6*22*11.4)

La ecoj de Ekonomia Leviga Tablo:

---

♦ Peza devo

♦ Unika lifta dezajno rapide levas kaj malaltigas materialon

♦ Nova dezajno por plenumi kun la normo EN1570: 1999

♦ Superŝarĝi valvo protektas pumpon kaj operatoro

♦ Ergonomia veturila desegno plibonigas uzantan sekurecon

♦ Du rulaĵoj giratorias kun bremsoj kaj du rigidaj

Postventa servo:

---

♦ Ĉiu ekipaĵo venas kun specifinstruado

♦ 1 Jaro Limigita Garantio (krom por portado de partoj ， kiel radoj)

♦ Ni estis en fabrikado de telfero dum multaj jaroj. Kaj ni havas profesian kaj perfektan post-vendan servan teamon.

♦ Provizu rezervan servon

Operating procedures:

---

1. It is necessary to repeatedly step on the pedal to make the cargo rise to the required height with the work surface;
2. Slowly lift the handle, open the check valve to make the work surface slowly descend;
3. Please turn on the brake before moving the lift table.

 

Attention and maintenance:

---

1. The unit is specially designed and operated by the user;
2. It is strictly forbidden to use overload or unbalanced load;
3. During the operation, it is strictly forbidden to stand on the platform;
4. It is strictly forbidden to place your hands and feet under the lowering table;
5. When the goods are being loaded, the brakes should be braked to prevent the hydraulic lift table from moving;
6. The goods should be placed in the center of the countertop and placed in a stable position to prevent slippage;
7. When the cargo is lifted, the platform truck cannot be moved;
8. When moving, be sure to hold the handle to move the lift table;
9. Use the manual lift table on a flat, hard ground, and do not use it on slopes or bumps.
10. After the operation is completed, the goods should be unloaded to avoid deformation of the platform truck caused by heavy load for a long time;
11. When maintaining, be sure to support the scissor arm with the support rod to avoid the lowering of the table during the work of the operator.

Fabrikanto de Tablo Levu

---

Kiel profesia fabrikanto de diversaj specoj de materialo-manipulado kaj levado de produktoj, Lift Table estas unu el niaj ĉefaj produktoj. Aldone al ĉi tio, ni ankaŭ povas fabriki diversajn specojn de transportoj, stapliloj, telferoj, transparon, gruo, ktp. Se vi ŝatus aĉeti Elektran Tablo, vi povas sendi retpoŝton de ĉi tiu paĝo por citi nun.

Common Failure and Solutions:

---

（一）The lift table is weak or unable to lift

Reasons and elimination methods:

1. Cause: overload

Elimination method: reduce the load can be eliminated

2. Reason: the oil return valve is not closed

Elimination method: tighten the return oil valve can be eliminated

3. Reason: the one-way valve of the manual pump is stuck and fails

Elimination method: unscrew the oil pump valve port bolt, overhaul, clean, replace clean hydraulic oil can be eliminated

4. reason: manual pump, gear pump serious oil leakage

Elimination method: replace the oil pump seal ring can be eliminated

5. reason: gear pump damage, hit the oil without pressure

Elimination method: replace gear pump can be eliminated

6. Reason: insufficient hydraulic oil

Elimination method: add enough hydraulic oil to eliminate

7. Reason: circuit break

Exclusion method: check the button contactor and fuse can be excluded

8. Reason: clogged filter

Elimination method: replacement or cleaning can be eliminated

（二）The lifting platform drops naturally

Causes and elimination methods

1. Reason: one-way valve discharge

Exclusion method: check the one-way valve in the valve group.If there is dirt on the sealing surface of the one-way valve. Clean check valve.

2. Reason: the descending valve is not tightly closed

Elimination method: check whether there is electricity in the descending valve, if there is no electricity, remove the fault of the descending valve itself or replace the descending valve.The slide valve of the descending valve must be kept clean and movable.

3. Cause: leakage in the oil cylinder

Elimination method: replace cylinder seal

（三）The lifting platform does not descend

1. Reason: the descending valve fails

Elimination method: in the case of pressing the drop button, check whether the drop valve has electricity.If there is no electricity, try to eliminate it.If there is electricity, remove the falling valve itself fault, or replace the falling valve.The slide valve should be kept clean and lubricated.

2. Reason: the descending speed control valve is out of balance

Elimination method: adjust the control valve of falling speed, if the adjustment is invalid, replace the new valve.

Rilataj Produktoj

---